[Prev][Next][Index][Thread]

Fiberglass Secondary Coil Form Idea



 All,  It would seem that a fiberglass secondary coil form made from
fiberglass cloth and resin over a form such as cardboard or PVC would be
ideal.  Two layers of fiberglass cloth over a temporary cardboard or PVC
form should be strong enough.  The cardboard form could be removed by
soaking in water to dissolve it out and the PVC could be covered with wax
paper no avoid sticking so it could be removed.  The result could be sanded
or turned smooth.  Has anybody tried this or know of a problem with this
method?    Dick