[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Neon Transformers




Ideally the voltage would be 15kv -at-80ma. But be careful to ensure that the
two transformers are in phase and some form of equalization network exists
between them.


> -----Original Message-----
> From:	Tesla list 
> Sent:	Thursday, October 05, 2000 9:18 AM
> To:	tesla-at-pupman-dot-com
> Subject:	Re: Neon Transformers
> 
> Original poster: "Albert Hassick" <uncadoc-at-juno-dot-com> 
> 
> Hi Jason.  I messed around with trannies just to see what would happen,
> and my experience is that the smaller tranny seems to become "swamped"
> and really does not seem to add much to the overall system output.   But
> I only tried this with a 15kv 60ma. coupled in parallel with a bank of
> three 20ma. 10kv.  OBT's. But maybe neons of the same voltage output may
> indeed increase your output, but perhaps at the expense (early demise) of
> the smaller neon.   AL.
> 
> 
> On Tue, 03 Oct 2000 20:44:01 -0600 "Tesla list" <tesla-at-pupman-dot-com>
> writes:
> > Original poster: "jason wallace" <jcwallace-at-cybrtown-dot-com> 
> > 
> > Is it possible to connect a 15 kv 60 ma transformer in paralle with 
> > a 15kv
> > 30ma??? ANd if it is possible what would the total ma be? and total 
> > voltage??
> >  
> > Thanks
> > Jason Wallace
> > 
> > 
> > 
> 
>