[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Sealing secondaries



Hi Brad.   I have not used the foam system on any of my coils, but I will
vouch for fiberglass resin as a interior coating.  The tiger hair resin
worked very well for me.  I just mixed up a pot of it and coated the
entire interior of the secondary with the resin. (this was after I had
polyed the inside and outside of the secondary form)  I then  placed the
end caps on and I then tilted the coil back and forth until I was
satisfied that the excess resin had completely encompassed the form and
its end caps.  If you do go with the foam interior, then keep us posted,
because it sounds interesting!   Al.

On Mon, 11 Sep 2000 21:54:15 -0600 "Tesla list" <tesla-at-pupman-dot-com>
writes:
> Original poster: "Brad DiGiovine" <guido28-at-mediaone-dot-net> 
> 
> To all,
> I am currently in the process of building a large coil.  The 
> secondary
> form is 8" in diameter and 40 inches long.  I sealed the outside of 
> the
> form with urathane twice, wound the coil, and then coated it 4 more
> times.  I want to seal the inside of the form, would drying it and
> sealing up the ends with great suff foam work well, i was wondering 
> if
> the foam would actually have any dampness in it that it may seal 
> into
> the cardboard form.
> 
> Thanks for your help!
> Brad DiGiovine
> 
> 
>