Re: Need help identifying a transformer

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Kent Vander Velden by way of Terry Fritz <twftesla-at-uswest-dot-net>" <graphix-at-iastate.edu>


In message <4.1.20010405101103.00a29eb8-at-pop.dnvr.uswest-dot-net>, "Tesla list" writ
es:
>Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>" <sdate-at-gte-dot-net>
>
>Kent,
>
>You need one more detail... the output voltage.
  
  That is what I was afraid.... there is was no mention of the output 
voltage at all.  Also, the isolation on the both (what I assume) are the
input and output wires are the same.

>It may be an isolation xformer... 1 to 1 ratio...

  That would fit in with the surrounding transfers which are isolation
and filtering transformers.

>use a small AC voltage on the input/primary and measure the output
>voltage to find the ratio.... that will lead you to all the answers.

  A bit hard to do before buying, but I will try.

  Thanks!

---
Kent Vander Velden
kent-at-iastate.edu