[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Brass electrodes: was- A Little more than generalquestionsII



Original poster: "Metlicka Marc by way of Terry Fritz <twftesla-at-uswest-dot-net>" <mystuffs-at-orwell-dot-net>

ed,
well i will take back the "anyone", i apologize.
and i do remember your telling me that you feel pure tungsten is better,
could you refresh my memory as to the benefits over carbide?
i know the melting point is slightly higher for pure tungsten, but i
think the sintering process does something to the carbide because i've
seen no erosion or melting of even the sharpest edges. to give an
example, on my triggered gap i use a small ball mill for the trigger
electrode, this ball has many fine teeth on it, after much firing the
teeth are still there, the pure tungsten rod i have has rounded over a
bit with time?
maybe pure tungsten has some redeeming qualities, i wont argue that, but
the fact that carbide comes in such a wide variety of shapes and sizes,
one for ANY design, and dull or chipped inserts run about $10.00 a
pound, makes it a great electrode for coilers like me, the low budget.
for those that might not know, pure tungsten and tungsten carbide are
two different critters.
marc

Tesla list wrote:
> 
> Original poster: "Edward Wingate by way of Terry Fritz
<twftesla-at-uswest-dot-net>" <ewing7-at-rochester.rr-dot-com>
> 
> Tesla list wrote:
> >
> > Original poster: "Metlicka Marc by way of Terry Fritz
> <twftesla-at-uswest-dot-net>" <mystuffs-at-orwell-dot-net>
> >
> > i have to disagree, i still maintain that tungsten carbide is hands down
> > the best electrode material there is. anyone that takes the initiative
> > to try it will agree if they've tried many different materials.
> > absolutely no wear, good conductivity, great sinking ability and super
> > cheap all adds up to far and above all else.
> > marc m.
> 
> Marc,
> 
> Maybe not anyone! :^)
> 
> I HAVE taken the initiative to try many different materials, including
> tungsten carbide and there is no substitute for pure tungsten. Period!
> 
> Ed Wingate RATCB