[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: copper plating - Electrode Tips



Original poster: "Metlicka Marc by way of Terry Fritz <twftesla-at-qwest-dot-net>" <mystuffs-at-orwell-dot-net>

All,
If any want to use carbide but cannot find\do a way to braze the tips, I
would like to say that you can take your pieces to a local jeweler that
"fixes" jewelry
and ask them to silver solder them for you.
Most jewelers are very "new thing" friendly and most likely will ask
many tc questions while the weld?
Take care,
Marc M.
geek #1055
(PI geek)
http://www.thegeekgroup-dot-org/
"because the geek shall inherit the earth" or at least try to make it
better.