[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Resistor coat

To: tesla-at-pupman-dot-com
Subject: Re: Resistor coat
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 28 Aug 2001 08:18:33 -0600
Resent-Date: Tue, 28 Aug 2001 08:42:00 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <MYlQiC.A.JLG.z26i7-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Hollmike-at-aol-dot-com>

In a message dated 8/27/01 10:17:37 AM Mountain Daylight Time, 
tesla-at-pupman-dot-com writes: 





I would bet that the glaze and ceramic are 'scraped' away before firing.   
Mike 

>
> Terry     Most power resistors are coated with a ceramic glaze that is well 
> bonded to the resistor wire  any attempt to grind or cut through usualy 
> fails.      Robert 
>
>

Prev by Date: RE: Where to get high voltage diodes?
Next by Date: Re: Help with Secondary
Prev by thread: Resistor coat
Next by thread: Where to get high voltage diodes?
Index(es):
- Date
- Thread