winding length

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <PsychoticMinds1-at-aol-dot-com>

Hi list 

  Hi im about to wind my first coil. i have 4500 feet of wire im thinking of
using a 6 inch diameter pipe. any suggestions on the length of the winding  or
# of turns i should use im using 22 awg mag wire. any imput is appriciated
thatnx

                                                                           
                                         Frank