[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

ARSG Motors



Original poster: "S & J Young by way of Terry Fritz <twftesla-at-qwest-dot-net>" <youngs-at-konnections-dot-net>

Coilers,

If I can't get a TSG working well with a filtered DC supply (quench
problems), then I plan to make an improved variable speed RSG.  My current
one uses an inexpensive angle grinder from Harbor Freight.  The grinder is
really crummy - it has very loud and awful sounding gear mesh noise, and the
bearings have slop in them which prevent being able to use close electrode
spacing.

But I like the angle grinder approach as it is easy to mount, is the right
RPM range, and has a good built-in means of securing the disk to it.  Can
someone recommend from experience a more precision angle grinder which is
not overly noisy and has good gears and bearings with no play?

Thanks,
--Steve