[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Plastic Resource

Original poster: "D&M's High Voltage by way of Terry Fritz <twftesla-at-uswest-dot-net>" <DMsHV.DavMcKin-at-gte-dot-net>

Ted, List:

D&M's High Voltage sells 3/8" thick PVC sheet for $6.95 / sqft. +
S&H - cut to your specifications (1 sqft. minimum).

We also offer pre-cut primary supports for 1/4" tubing made from
PVC sheet.  Supports (8 total) for 13 turn primaries are
$16.95 + $3.75 S&H, and supports for 15 turn primaries are
$17.95 + $3.75 S&H.  We also offer custom sizes and number of
turns.  Supports for 3/8", 1/2" and other sizes available.

To contact us:

D&M's High Voltage
P.O. Box 24002
Tampa, FL  33623
(813) 784-8165

E-mail:  DMsHV.DavMcKin-at-gte-dot-net
Webpage:  http://home-dot-netcom-dot-com/~davmckin/DMsIndex.htm

> Original poster: "Ted Rosenberg by way
> Hello all:
> I know everyone tends to have their own special source of plastic be it
> HDPE, PVC or what have you.
> But I have found a new resource.
> And the nice thing? They cut for you if you don't feel like it (or can't)
> although I haven't
> asked about G-10 yet. Don't want to be laughed at for asking THEM to cut
> But for example, they charge $5 sq ft for 1/4-inch white PVC sheet. $10
> 1/2-inch thick.
> It's a full line company.
> Toll free call in number too. Check the line....
> http://www.boedeker-dot-com
> Located in southern Texas.
> Safety First
> Ted