[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MOT's

Original poster: "Jason Johnson by way of Terry Fritz <twftesla-at-uswest-dot-net>" <hvjjohnson13-at-hotmail-dot-com>

Yeah, be sure to grab the capacitor, the diode, the magnetron (well maybe
not :-), the fan, the fuse holder etc. etc. The capacitors and diodes are
useful for voltage doublers, the fan can be used as a fan or for the motor,
the fuse holder can be modified as a primary tap (I found that one of the
clips can be removed and makes a perfect tap for 1/4" Cu tubing. The
magnetron can be useful but you need to know exactly what your doing if you
were to want to power it up after you remove it. You can find two big donut
magnets in the magnetron if you want to tear it apart instead of using it
(probably better for your health :-). You can see what I do with my MOTs at
http://www.how.to/laser or http://teslapages.freeservers-dot-com/MOT.html

Jason Johnson

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, February 24, 2001 9:05 PM
Subject: MOT's

> Original poster: "R Lunsford by way of Terry Fritz <twftesla-at-uswest-dot-net>"
> Are there any more "good" parts in a microwave other than the MOT that
would be
> of use to a coiler? It just so happens that I ran across a few freee ones
> today.
> Thanks,
> Robert Lunsford
> Charlotte, NC