[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: cable and enamelled copper wire

Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>" <Mddeming-at-aol-dot-com>

In a message dated 2/26/01 8:12:55 PM Eastern Standard Time, tesla-at-pupman-dot-com 

> > Original poster: "Gavin Dingley by way of Terry Fritz 
> <twftesla-at-uswest-dot-net>" <gavin.dingley-at-ukf-dot-net> 
> > 
> > Hi all, 
> > does any of you know of a supplier of high voltage cable (>5kV) and 
> enamelled 
> > copper wire for secondary coil winding, in the U.K. 
> > 
> > Thank you in advance for your help. 
> > 
> > Gavin, U.K. 

Hi Gavin, 

I have used ordinary AWG #10 insulated wire from hardware store run through 
polyethylene tubing (also from hardware store) for up to 15KV rms. 

Matt D