[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Silicone Cement for re-assembling NST's?



Original poster: "Garry Freemyer by way of Terry Fritz <twftesla-at-uswest-dot-net>" <Garry-at-NDFC-dot-com>

Actually, I recently found that soaking in Mineral Spirits actually loosens
the silicone. It turns to a jellyfish like mass about double the size as it
absorbs the spirits. I was able to slide it off the wires and it literally
fell off the NST and was just hanging on by the wires.

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Monday, January 15, 2001 5:48 AM
To: tesla-at-pupman-dot-com
Subject: RE: Silicone Cement for re-assembling NST's?


Original poster: "Lau, Gary by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<Gary.Lau-at-compaq-dot-com>

Original poster: "Ed Phillips by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<evp-at-pacbell-dot-net>

Tesla list wrote:
> 
> Original poster: "Lau, Gary by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<Gary.Lau-at-compaq-dot-com>
If you found that you ever needed to unpot it again, the
> silicone is there to stay - nothing can remove it.