Top load capacity

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "J. B. Weazle McCreath by way of Terry Fritz <twftesla-at-uswest-dot-net>" <weazle-at-hurontel.on.ca>


Hello Coilers & Terry,

I had a question about calculating the capacity of a double toroid top
load last week, as WinTesla only allows for one toroid.  Terry suggested
that I use E-Tesla6 to find the capacity of the double toroid and then
simply insert the result into the topload page of WinTesla.

I wanted to let you know that the suggested method worked just fine and
produced excellent results.  The tap point on the primary was within
less than one quarter of a turn of where WinTesla predicted it to be.
These software programs are great...sures saves a lot of cut and try!


73, Weazle, VE3EAR/VE3WZL

Listening: 147.030+ and 442.075+
E-mail:    weazle-at-hurontel.on.ca
           or ve3ear-at-rac.ca
Web site:  www.hurontel.on.ca/~weazle