[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: H/D Ratio



Original poster: "Albert Hassick by way of Terry Fritz <twftesla-at-uswest-dot-net>" <uncadoc-at-juno-dot-com>

Dennis, It will work OK, and also it will give you a point of reference
that you can apply to future coils.   Al. 

On Sat, 20 Jan 2001 09:30:53 -0700 "Tesla list" <tesla-at-pupman-dot-com>
writes:
> Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>" 
> <Leik3-at-aol-dot-com>
> 
> Hi All,
> I have a 15/30 and my secondary is going to be 4.5 (o.d.) inches. I 
> was 
> planning on a h/d ratio of 4 leaving me with 18 inches of winding 
> height. Any 
> comments on this?? Is it too large of a ratio, will my transformer 
> power it 
> with decent results?? I haven't wound it yet, so it's not too late 
> to get a 
> smaller form if necessary.
> Thanks a bunch,
> Dennis
> 
> 
> 

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno-dot-com/get/tagj.