RE: Epoxy

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Vanderputten, Gary by way of Terry Fritz <twftesla-at-qwest-dot-net>" <gvp-at-pvaintl-dot-com>

Ben

My copper pipe static gap has 8 x  2" pipes epoxy-glued to the outside of a
plastic bottle and it works very well. Simple construction and gapping as
well. The entire unit is wedged into another 4" pipe with a muffin fan on
the end; the fan is very important in my 360w unit. So far, so good.

Gary

. This is fine for 360 w unit. 

 -----Original Message-----
From: 	Tesla list [mailto:tesla-at-pupman-dot-com] 
Sent:	Wednesday, July 11, 2001 9:28 AM
To:	tesla-at-pupman-dot-com
Subject:	Epoxy

Original poster: "Ben Murrell by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<benmurrell-at-att-dot-net>

All,
Does anyone know if epoxy will hold acrylic to copper? (The 2 plunger "shot"
type where you mix the resin and such?)
Thanks,
Ben