[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Epoxy



Original poster: "Ed Phillips by way of Terry Fritz <twftesla-at-qwest-dot-net>" <evp-at-pacbell-dot-net>

Tesla list wrote:
> 
> Original poster: "Ben Murrell by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<benmurrell-at-att-dot-net>
> 
> All,
> Does anyone know if epoxy will hold acrylic to copper? (The 2 plunger "shot"
> type where you mix the resin and such?)
> Thanks,
> Ben

	It will if you get both surfaces clean enough.  Guys where I work
recommend using Ajax scouring powder and a tooth brush to clean the
area, then water rinse and air dry.  Has always worked for me.

Ed