Re: First light - NOTHING HAPPENED!

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <FutureT-at-aol-dot-com>

In a message dated 7/13/01 10:18:33 AM Eastern Daylight Time, 
tesla-at-pupman-dot-com writes:

> I know it's a bit of a pain, but I'd try re-winding the primary so as
>  to get its inner diameter a little smaller, which will greatly help
>  out with increasing the coupling.
>  

Robert,

You can just lower the secondary so the bottom is 1/2" to 1" lower
than the primary to increase the coupling if needed.  This is how
I run my research coil when I use the 4" secondary with the 8.5"
inner dia. primary.

John Freau