[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

HV Cap testing,



Original poster: "Jonathan Peakall by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jpeakall-at-mcn-dot-org>

Howdy,

Can someone point me to a good source of info regarding testing caps
with voltage? I tried putting 120vac into my caps, then testing them
with a DMM, and all I get is a brief reading that is much lower than
120v. What is the proper way to do this,

Thaks all,

Jonathan