[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Building the Primary Coil



Original poster: "Gregory Hunter by way of Terry Fritz <twftesla-at-qwest-dot-net>" <ghunter31014-at-yahoo-dot-com>

Hi Patrick,

Study my primaries at:

http://hot-streamer-dot-com/greg

If this doesn't clear things up, you may contact me
off-list for specific questions.

Greg

--- Tesla list <tesla-at-pupman-dot-com> wrote:
> Original poster: "Patrick Bloofon by way of Terry
> Fritz <twftesla-at-qwest-dot-net>" <transactoid-at-home-dot-com>
> 
> My question was more meant to address the issue of
> how people make their
> spacings on whatever they use to space the turns.
> I'm really bad with
> "visualizing" construction plans. If you have say, 4
> supports, you don't
> just drill equally aligned holes up the supports do
> you? In order for it to
> spiral, won't each supports' holes have to be offset
> from the previous
> one???
> 
> Sorry if this is a really simple question. I just
> cannot picture this in my
> head....
> 
> Thanks,
> Patrick.
> 


__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals.
http://personals.yahoo-dot-com