[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Leaking Caps



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Pyrotrons-at-aol-dot-com>

Use lots and lots of paper towels soaked with high-grade rubbing alcohol, 
throw away the used paper towel every time and grab a new one.

After cleaning the WHOLE area to be soldered, scrub it with medium grit 
sandpaper and reclean a million times with an alcohol soaked paper towel.

That should do it. You can also apply an acid flux to clean the heck out of 
it (C-flux works GREAT).

Justin Hays
KC5PNP
G-3 #1150
Email: pyrotrons-at-aol-dot-com
Website: www.hvguy-dot-com