Re: Looking for run caps, urgent

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Michael Rhodes by way of Terry Fritz <twftesla-at-qwest-dot-net>" <rhodes-at-fnrf.science.cmu.ac.th>

Thanks for this very useful piece of data.  Obviously my program
is incorrect in that I am using the rated KVA. I will change it to
use the corrected power factor.

--Michael (QuickTC)

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, October 24, 2001 6:33 AM
Subject: RE: Looking for run caps, urgent


> Original poster: "Mike Wood by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<mike.wood-at-opennw-dot-com>
>
>>>>>>>snipped<<<<<<<<<<<<<<<<
>     CORRECTED KVA is determined by dividing the corrected power factor
>     output of the neon sign xfrmr (below) by 1000
>
>                  Corrected Power Factor
>
>         Secondary Rating         Volt-Amps
>              kV,mA
>
>              15,120                 900
>              15,60                  450
>              15,30                  250
>              12,120                 775
>              12,60                  400
>              12,30                  200
>               9,120                 600
>               9,60                  300
>               9,30                  150
>             7.5,120                 500
>             7.5,60                  250
>             7.5,30                  125
>               6,60                  200
>               6,30                  100
>
> Equation courtesy of Richard Quick
>
> =======================================================================
>
>
> which makes a big difference.
>
>