[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: New Coil Design



Original poster: "Ben Murrell by way of Terry Fritz <twftesla-at-qwest-dot-net>" <benmurrell-at-att-dot-net>

DOH , I am using a 9/30 NST too.
Sorry, Ben
----- Original Message -----
From: "Ben Murrell" <benmurrell-at-att-dot-net>
To: "Tesla list" <tesla-at-pupman-dot-com>
Sent: Monday, September 03, 2001 6:38 PM
Subject: New Coil Design


> All,
>     I am making a new coil design, and plugged the secondary and primary
> numbers into the JavaTC calc . I will be using a Static SG with 10 copper
> bars and  the capacitor size mentioned. Could You advise me on how to
better
> this coil? I am open to any suggestions, excepting the Magnet wire that I
> already have.
>
> Thanks,
> Ben
>
> SECONDARY
> 30 gauge
> secondary diameter=2.5in
> Secondary height=10in
> wire lenght=555ft
> Toroid major diameter=8.2in
> Tor minor=3.937in
> Resonant freq= 444.9
>
> PRIMARY
> Inner Diameter=2.6in
> wire diameter=.25in
> Wire spacing=.25in
> # of turns= 9.27in
> wire length=16.6ft
> angle=15
> Primary cap size= .008842 uf
> Resonant Freq= 445.2
>