[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: stacked poly cap

To: tesla-at-pupman-dot-com
Subject: Re: stacked poly cap
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Thu, 06 Sep 2001 07:55:13 -0600
Resent-Date: Thu, 6 Sep 2001 08:11:59 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <2iUzOC.A.VlF.pQ4l7-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Cydesho-at-aol-dot-com>

My coil is running off of a 15kV NST, so it seems that a stacked poly cap 
made of the 1/16" HDPE wouldn't be able to withstand the voltage. Would the 
1/8" thick sheets work? What is the dielectric strength per mil?
                                Justin

Prev by Date: Re: Ignition Coil Experience
Next by Date: Re: Heavy build wire for secondary?
Prev by thread: Re: stacked poly cap
Next by thread: Re: stacked poly cap
Index(es):
- Date
- Thread