[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Spark Gap question



Original poster: "Johnson, Jeffrey D -at- PWC by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jeffrey.d.johnson-at-l-3com-dot-com>

This question is regarding the famous RQ/TCBOR gap.  I've read that you
should use 1.5" copper pipe and figure on 1000 V per gap.  If I'm running a
15kV NST that means I need 2 to 3 six gap assemblies in series.  Can't I
just use 1" pipe and put 15 2" pieces inside a 6" section of PVC?  

JJ