[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: A beginner



Original poster: "george hadle by way of Terry Fritz <twftesla-at-qwest-dot-net>" <ckreol1-at-yahoo-dot-com>

I (as well as others, I assume) want to know your
quick way to make the spark gap. Please 
thanks 
george
--- Tesla list <tesla-at-pupman-dot-com> wrote:
> Original poster: "Vanderputten, Gary by way of Terry
> Fritz <twftesla-at-qwest-dot-net>" <gvp-at-pvaintl-dot-com>
> 
> Don,
> 
> I would recommend that a beginner first start with
> RQSG (Richard Quick) type
> of tube gap - the rotary is a lot of extra work.
> None of my coils use them
> and I am content with their performance. (On the
> other hand, mine don't
> throw 3' sparks, either.) 
> 
> 
> If you need advice on a simplified way to quickly
> build a RQSG without the
> nuts and bolts contact me at garyvp-at-earthlink-dot-net.
> 
> Good luck 
> 
>  -----Original Message-----
> From: 	Tesla list [mailto:tesla-at-pupman-dot-com] 
> Sent:	Sunday, March 24, 2002 5:04 PM
> To:	tesla-at-pupman-dot-com
> Subject:	A beginner
> 
> Original poster: "by way of Terry Fritz
> <twftesla-at-qwest-dot-net>"
> <dlynch-at-reyercorp-dot-com>
> 
> Hello,
> 
> There was a Tesla coil in my high school elctronics
> class many years 
> ago. There was an ealier "unconfirmed" adventure,
> wherein the class 
> held hands and formed a chain down the hall to the
> nearby class to 
> "touch" the teacher.
> 
> But that was then, and I never studied the
> construction, and now my 
> daughter wants to build one for her high school
> senior project.
> 
> Could someone point me to a basic "block diagram"
> description of the 
> rotary gap type?
> 
> I have been searching the Web and joined this list,
> but I'd like to start 
> with the simplified picture and build from there.
> 
> Thanks in advance for any guidance.
> 
> Don
> 
> 
> 
> 


__________________________________________________
Do You Yahoo!?
Yahoo! Movies - coverage of the 74th Academy Awards®
http://movies.yahoo-dot-com/