[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Cheaper Ignition Transformer Supply



Original poster: "S & J Young by way of Terry Fritz <twftesla-at-qwest-dot-net>" <youngs-at-konnections-dot-net>

USA Manufacturing carries surplus ignition transformers.  It takes a bit of
searching the site to find them.  They are cheaper than Graingers.  Try
searching for the manufacturer, such as Webster.  You will find some ranging
from $10 to $30.
www.usamfg-dot-net

--Steve


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, March 26, 2002 6:59 PM
Subject: Re: Ignition Transformer


> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<dlynch-at-reyercorp-dot-com>
>
> Hi,
>
> A new one from Graingers costs $38.
>
> Don
>
>
> On 26 Mar 2002 at 7:40, Tesla list wrote:
>
> > Original poster: "Ed Phillips by way of Terry Fritz
<twftesla-at-qwest-dot-net>"
> <evp-at-pacbell-dot-net>
> >
> > Tesla list wrote:
> > >
> > > Original poster: "torlin by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> > <torlin-at-ghostmail-dot-net>
> > >
> > > My first TC was built around a 10KV 23mA fuel oil furnace
> > > transformer.  It worked really well until I got stupid and
> > > cut the secondary coil in half to make a tertiary coil.
> > >  OOPS.  The Ignition transformer is still working, but the
> > > coil is dead now.  They are very sturdy and easy to set
> > > up, and usually much cheaper than Neon Sign Trannies or
> > > Pole Pigs.
> > >
> > > Hope it helps
> >
> > Are they really cheap?  I'd like to get one to power a small TC and
> > haven't figured out how to do it (in Pasadena, CA area).
> >
> > Ed
> >
> >
> >
>
>
>
>