[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Model for Tesla Coil PSPICE - Terry's paper



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>

Thanks much.  This will help me greatly !

Dan




 > Hi Dan,
 >
 > I trust you have seen the paper at:
 >
 > http://hot-streamer-dot-com/TeslaCoils/MyPapers/modact/modact.html
 >
 > The inductances can be directly measured or calculated using the equations
at:
 >
 > http://home.earthlink-dot-net/~electronxlc/formulas.html
 >
 > for spiral coil inductance and helical coil inductance.  These equations
 > are accurate to within a few percent.  The mutual inductance can be
 > measured are calculated using this program:
 >
 > http://hot-streamer-dot-com/TeslaCoils/Programs/MANDKV31.ZIP
 >
 > http://hot-streamer-dot-com/TeslaCoils/Programs/MANDKV31.PDF
 >
 > The resonant frequency (and total secondary capacitance) can be found with
 > this program:
 >
 > http://hot-streamer-dot-com/TeslaCoils/Programs/E-Tesla6.zip
 >
 > The capacitance just due to the secondary coil can be found using the
 > Medhurst equation at the above site.
 >
 > Bart also has a new super program that can due basically all this at:
 >
 > http://www.classictesla-dot-com/fantc/fantc.html
 >
 > Check these out and let me know.  If you want to see how any are
 > calculated, try to give the dimensions and numbers and I'll try to figure
 > it out for you.  You should also see:
 >
 > http://hot-streamer-dot-com/TeslaCoils/Misc/impedance/impedance.html
 >
 > Cheers,
 >
 >          Terry
 >
 >
 >
 >
 >
 >
 >
 >
 >
 >
 >
 >