[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: primary tapped at 2 turns



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Esondrmn-at-aol-dot-com>

In a message dated 2/17/02 8:11:38 PM Pacific Standard Time, tesla-at-pupman-dot-com
writes:


>
> hi all
>         i have my primary tapped at two turns now instead if 8 turns before 
> i was running a 7.5kv 60ma supply and i am now running 5kv 120ma 
> is it normal for the tap to go inwards rather than out because when i changed
> from 6kv 30ma to 7.5kv 60ma it went further out but now its two turns on
> 120ma
> 5kv
> any ideas will be much appreciated
> many thanks
> colin heath




colin,

The tap point for tuning should change little or none as the power supply is
changed.
Has something else been changed?

Ed Sonderman