[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Function Generator Output Impedance

To: tesla-at-pupman-dot-com
Subject: Function Generator Output Impedance
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 27 Feb 2002 07:19:58 -0700
Resent-Date: Wed, 27 Feb 2002 07:27:01 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <P2gt_C.A.oTE.syOf8-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Barton B. Anderson by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla123-at-pacbell-dot-net>

Hi All, 

Question: 
While looking for low output impedance generators, I keep running across 50
ohms which appears to be typical. Are there lower output impedance
generators? Are there methods to reduce a typical 50ohm output impedance
generator down to near zero ohms? 

Thanks, 
Bart

Prev by Date: Re: Measuring self-capacitance directly (Re: flat secondary)
Next by Date: Re: How to Tune a Flat Spiral Coil
Prev by thread: Re: Small spun triode
Next by thread: Re: Function Generator Output Impedance
Index(es):
- Date
- Thread