Re: MOT Windings

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "S & J Young by way of Terry Fritz <twftesla-at-qwest-dot-net>" <youngs-at-konnections-dot-net>

Matthew,

No need to remove them - they don't degrade anything unless they are
shorted.  Your cut 'n tape method is fine.
--Steve
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, January 10, 2002 10:38 PM
Subject: MOT Windings


> Original poster: "Matthew Smith by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <matt-at-kbc-dot-net.au>
>
> Hi all
>
> Any tips for removing heater windings from MOTs without grinding off the
> weld and disassembling the whole thing?  I've tended to leave them (ends
> cut and taped) for fear of damaging the other windings.
>
> Cheers
>
> M
>
> --
> Matthew Smith
> KBC, PO Box 150, Kadina, 5554, S. Australia
> Ph: (08) 88 212 395  Fx: (08) 82 190 157
> http://kbc-dot-net.au
>
>
>