[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MOT Powered Coil



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <A123X-at-aol-dot-com>

Will an MMC rated for 12Kvdc be enough for the twin MOT supply with an output
of 8Kvac or technically a round 11KVDC? Also, if I used 4 MOT's in series how
much will it matter if some are kinda a bit smaller and the voltage output of
them varies? It would seem to me that the large MOT's would put out more of the
power and even if this isn't the case wouldn't an 1800v MOT put out more
current than the 2000v or 2100v ones causing things to get messed up? or do
things just even out? 

Mark