[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: sync motors



Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Sean,

See the following info for the conversion:

http://hot-streamer-dot-com/TeslaCoils/Misc/syncmot.zip

http://hot-streamer-dot-com/TeslaCoils/Misc/sync_motor.txt

Cheers,

        Terry


At 05:50 PM 1/27/2002 -0500, you wrote: 
>
> Hi all - 
>  
> I was reading some old posts about sync motors for a RSG, and found one about
> making a sync motor from a typical (I think) AC motor.  I might have read it
> incorrectly, but is this possibly?  How exactly does one go about doing
> this?  Is there a webpage taht describes how to do it? I have a few 1/4, 1/3,
> and 1/2 HP AC motors laying around . . . great for a SRSG, except that
> they're not synchronous.  Thanks for any help anyone can give me!
>  
>
> ---------------
> Sean Taylor
> The Geek Group
> G-1 #1204 
> <http://www.thegeekgroup-dot-org>www.thegeekgroup-dot-org
> Because the Geek shall inherit the Earth!
>  
>
>