[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

New Linear Spark Gaps - Pic's and Info



Original poster: "Justin Hays by way of Terry Fritz <twftesla-at-qwest-dot-net>" <pyrotrons2000-at-yahoo-dot-com>

Hi All.

Aron and I just finished a couple of neat-looking spark gaps for our
new 4" TC's. They are linear statics, with 6 electrode holders and 5
gaps a piece. Alloy 360 brass holders, tunsten electrodes, G3 and G10
fiberglass baseplates. They were machined using Aron's tools, all
brass and nylon hardware.

The gaps are on our website, www.hvguy-dot-com, at the very top. You'll
see two pictures of the gap's there - click on the orange link.

Take care, thanks for looking.

Justin Hays
KC5PNP
Email: justin-at-hvguy-dot-com
Website: www.hvguy-dot-com

_