[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Terry's NST Filter



Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Dan,

The plans at:

http://hot-streamer-dot-com/TeslaCoils/Misc/NSTFilt.jpg

Are already for a 15kV NST.  The 14 MOVs are 1800V each for a total of
25200 volts.  However, you may want to go to 16 MOVs if you plan on using a
140 VAC variac and the MOVs happen to be on the low side of the 10% tolerance.

Cheers,

	Terry


At 11:24 AM 7/8/2002 -0400, you wrote:
>I'm planning to use Terry's design for a NST filter.  I assume i have to add
>MOV's to use this for 15kV, 60mA???
>
>Thanks
>Dan
>