[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Grounding question



Original poster: "Daniel McCauley by way of Terry Fritz <twftesla-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>

Just a quick question regarding ground as i've seen it done numerous
different ways on the web:

Here is what I was planning on doing - please advise if something is wrong
or done incorrectly:

1.  RF Ground (isolated ground system) connected to base of secondary and to
primary strike rail.

2.  Power Ground - connected to center tap of NST and case of NST as well as
ground on line filters.

Thanks again.

Dan