[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Garolite (G9, G10, G11) questions.

To: tesla-at-pupman-dot-com
Subject: Re: Garolite (G9, G10, G11) questions.
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sun, 09 Jun 2002 11:17:28 -0600
Resent-Date: Sun, 9 Jun 2002 11:18:29 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <vf_TUB.A.uJ.f34A9-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Jim Lux by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jimlux-at-earthlink-dot-net>


>
> I would avoid Teflons since they burn with wildly toxic gasses, cold flow,
> expensive...  The glass filled is used at work now but I would not use it
> for a gap.  Too weak really.

If you were worried about loss at microwave frequencies (1 GHz and up) then
the PTFE composites would be worth considering. For a TC at 100 kHz... who
cares about RF properties of the material.

Prev by Date: That Danish Coil
Next by Date: RE: [Tesla-2] The CURSE
Prev by thread: RE: Garolite (G9, G10, G11) questions.
Next by thread: Re: Garolite (G9, G10, G11) questions.
Index(es):
- Date
- Thread