[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

PVC secondaries



Original poster: "Mr Gregory Peters by way of Terry Fritz <twftesla-at-qwest-dot-net>" <s371034-at-student.uq.edu.au>

Hello all,

Some coil plans I have say that when using PVC as a coil form, it should
be coated with polyurethane (or similar) BEFORE winding the wire on to
reduce losses. Is this really necessary? I would have thought it just
adds more loss by making the form wall thicker.


Cheers,

Greg Peters
Department of Earth Sciences,
University of Queensland, Australia
Phone: 0402 841 677
http://www.geocities-dot-com/gregjpeters