[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: new MOT stack completed!



Original poster: "tesla by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-paradise-dot-net.nz>

Interesting news, Same config here.
Questions
1) Any PFC (I do 100uF or so)
2) Any ballasting and if so how much (I do 22mH)
3) Are outer xfrmrs in oil ? (mine are)
Tnx
Ted Linney in NZ
----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, March 26, 2002 7:24 AM
Subject: new MOT stack completed!


> Original poster: "Tim J by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<digital_raven45-at-hotmail-dot-com>
>
> I have successfully tested my 6 seriesed MOT Tesla Coil supply! I am
> currently running 14.28 kV at 570 mA output power with slight to moderate
> stress on the transformer insulation (floating 7.1 kV on left, and right
> outer MOT's with middle two MOT's grounded!)