[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Hooking up caps



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jim-at-jlproduction-dot-com>

Hi all,
I was just doing some reading on hooking up two caps in parallel. One
article referred to making sure you connected positive to positive and
negative to negative.
This may sound moronic but even my big dollar commercial cap has no
markings of positive and negative. How would one determine this?

Thanks,
Jim
http://www.jlproduction-dot-com/Tesla.html