[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: oil dielectric

To: tesla-at-pupman-dot-com
Subject: Re: oil dielectric
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 15 May 2002 18:28:10 -0600
Resent-Date: Wed, 15 May 2002 18:42:15 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <_O-tOC.A.spC.YBw48-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "davep by way of Terry Fritz <twftesla-at-qwest-dot-net>" <davep-at-quik-dot-com>

>> 	Suppose the coil is running.
>> 	Suppose the coil arcs over, in an unexpected way.
>> 	Suppose the arc hits the oil.
>> 	Suppose (since its an insulator) the oil gets a breakdown
>> 	UNDER it.  Now the arc is in the oil.
 
> We're talking about enclosed containers with no air.

> There is no way the arc will contact the oil.


	What about fault conditions?

	best
	dwp

Prev by Date: Re: MMC Supplier
Next by Date: RE: 240v primary nst?
Prev by thread: Re: oil dielectric
Next by thread: Re: oil dielectric
Index(es):
- Date
- Thread