[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: polyethylene sheet used by builders.



Original poster: "Mr Gregory Peters by way of Terry Fritz <twftesla-at-qwest-dot-net>" <s371034-at-student.uq.edu.au>

If you do use this stuff, overate it considerably. It is usually 
recycled and thus has pretty poor electrical qualitites compared to 
virgin LDPE. Despite this, it can be used. Use whatever thickness you 
need, using multiple sheets. With this stuff, I would use about 2mm 
total dielectric thickness for every 10kV AC your tranny puts out.

Cheers,

Greg Peters
Department of Earth Sciences,
University of Queensland, Australia
Phone: 0402 841 677
http://www.geocities-dot-com/gregjpeters



----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Friday, September 13, 2002 3:14 pm
Subject: polyethylene sheet used by builders.

> Original poster: "Justin Wright by way of Terry Fritz 
> <twftesla-at-qwest-dot-net>" <ellis_p-at-picknowl-dot-com.au>
> 
> Hi All,
> 
> I was at the hardware store last night looking for buckets for a
> capacitor (yeah tom!) and I noticed some big roles of builders 
> plastic.The label said it was polyethylene.  
> 
> The plastic comes in a variety of styles, black, orange and clear.
> 
> Would there be any reason not to use this for making a capacitor?  It
> was about $5 per metre and was about 2 metres wide.
> 
> I am not sure how thick it is, but it feels thick and durable.  
> What is
> the best thickness to use?
> 
> 
> 
> regards
> 
> 
> Justin Wright
> 
> 
> 
> 
>