[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Conductive Polish for Toploads?????



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>

good ole rubbing alcohol (which is readily available and inexpensive) is
fine for aluminum toroids or you could just use soap and water.

Dan

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, September 22, 2002 12:30 AM
Subject: Conductive Polish for Toploads?????


> Original poster: "Writeme Now by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<writeme42-at-hotmail-dot-com>
>
> Hi,
>
> Was wondering what the best type of product to use for cleaning
> my toploads.  Is there anything in particular i should stay away
> from???
>
> Thanks in advance.
>
> Dan
>
>
> >
>
>
>
>
>
>