Re: Magnifier conversion

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Terry Fritz" <teslalist-at-qwest-dot-net>

Hi Ralph,

The label is long gone.  It was a full roll of polypropylene paint sheeting 
that is.... 0.005 inches thick.  I am not sure how long the roll was but it 
wrapped around the secondary about 5 times.  Not sure how many 5 mil layers 
that was but it was a lot ;-))  Here is a picture:

http://hot-streamer-dot-com/temp/NewMag/0429-04.jpg

Cheers,

         Terry


At 10:26 PM 4/29/2003 -0500, you wrote:
> >>>Since I was up at 0.46 coupling, I expected problems but the plastic
> > > sheeting worked very well.  The minor arcing was just due to fast sloppy
> > > application of the sheeting ;-)<<<
>
>Terry,
>
>Would you please identify the sheeting.
>
>Thanks,
>Ralph Zekelman