[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Toroid Behavior



Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net> 


Hi Dr R,

Is there any data on how it would change say for a 120 BPS system where the
fres is 100KHz using a 6x24 toroid.  The spark gap will be either a static
gap or a SRSG 120pps system.

Gerry R
Ft Collins, CO

 > Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com>
 >
 >
 > One must keep in mind these are direct current or small pulse rate
breakout
 > levels.  Or breakout values in air with no ground electrode nearby.  At
high
 > pulse rates or RF pulse rates the breakout value changes.
 >