[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 3kW, 120VAC Power Controller Complete - Photos



Original poster: "Nemphiz .... by way of Terry Fritz <teslalist-at-qwest-dot-net>" <nemphiz-at-hotbrev-dot-com>

That is what I call design !!!
Beutiful work you have done.

/Andreas

-----Original Message-----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com
Date: Fri, 17 Jan 2003 18:53:26 -0700
Subject: 3kW, 120VAC Power Controller Complete - Photos

 > Original poster: "by way of Terry Fritz <teslalist-at-qwest-dot-net>"
 > <dhmccauley-at-spacecatlighting-dot-com>
 >
 > My 3kW, 120VAC Power Controller is finally completed and has passed
 > initial
 > testing which was comprised of 5 hour overload tests at 30A, 120VAC
 > (primary
 > output) and 10A, 120VAC (aux. output).  Even though the variacs are
 > listed
 > at 20A and 8.5A respectively, with the very powerful fan cooling
 > system, the
 > variacs were only moderately warm after even
 > 5 hours of burn-in.
 >
 > Again, I'd like to thank all of you (except KEN who instead of helping
 > me,
 > criticized my troubleshooting skills) for your help with my chattering
 > relay
 > problem.
 >
 > Here are some initials photos and the website link:
 > (Please note that nomenclature, legends, etc... have not yet been
 > installed
 > on the chassis)
 >
 > Complete site for 3kW, 120VAC controller:
 > http://www.spacecatlighting-dot-com/teslacoil5.htm
 >
 > Front view of controller
 > http://www.spacecatlighting-dot-com/images/controller08.jpg
 >
 > Rear view of controller
 > http://www.spacecatlighting-dot-com/images/controller09.jpg
 >
 > Thanks again.
 > Now to build my new ARSG (utilizing the patented Terry Blake propeller
 > rotor)
 >
 > Dan