[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Tolerances and Study on Rotary Spark Gap spacing . . .



Original poster: "Steve White by way of Terry Fritz <teslalist-at-qwest-dot-net>" <slwhite-at-zeus.ia-dot-net>

In my opinion, the only reason to have extremely close spacing on the RSG
electrode gaps is to allow power control through the use of a variac. If the
gap spacing is large, then your RSG is only going to fire when your voltage
variac is turned all the way up. If power control is not important, then
space the gaps so that they fire reliably and that should be it.

Steve: Coiling in Iowa

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, January 21, 2003 1:21 PM
Subject: Tolerances and Study on Rotary Spark Gap spacing . . .


 > Original poster: "Mccauley, Daniel H by way of Terry Fritz
<teslalist-at-qwest-dot-net>" <daniel.h.mccauley-at-lmco-dot-com>
 >
 >
 >
 > Has anyone done a study on the tolerancing of electrode spacing in rotary
 > spark gaps in the closed circuit position.
 > Basically, I'm trying to determine a operational tolerance on the gap
 > electrode spacing and what
 > the performance vs. electrode spacing function would look like it.
 >
 > Or more simply put, how much difference would it make of say 50 mils
 > electrode spacing vs. say 200 mils electrode
 > spacing be during actual operation.  Or doesn't it matter that much as
long
 > as the arc can jump the gap?
 > I'd try the actual experiment myself, however, my four inch coil is
 > disassembled at the moment and my time is very
 > limited.
 >
 > Thanks for your help.
 >
 > Captain Corona
 >
 >
 >