[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Best Sec. form material



Original poster: "Crow Leader by way of Terry Fritz <teslalist-at-qwest-dot-net>" <tesla-at-lists.symmetric-dot-net>

6" PVC pipe is not hard to find. Skip home depot and go straight to a
plumbing store.

KEN

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, July 17, 2003 5:13 PM
Subject: Re: Best Sec. form material


 > Original poster: "Mark Broker by way of Terry Fritz <teslalist-at-qwest-dot-net>"
<mbroker-at-thegeekgroup-dot-org>
 >
 > Shane, basically the best material is the most convenient one.  You may
get
 > a few % more out of a PP or PE form than a cardboard form, but I'll bet
the
 > cardboard is cheaper and easier to get.
 >
 > Where in WI?  I'm in Oshkosh.
 >
 > Mark Broker
 > Chief Engineer, The Geek Group
 >
 > On Thu, 17 Jul 2003 15:27:03 -0600, Tesla list <tesla-at-pupman-dot-com> wrote:
 >
 > >Original poster: "Shane Rusch by way of Terry Fritz
<teslalist-at-qwest-dot-net>"
 > ><str-at-itol-dot-com>
 > >
 > >Hi all. I'm looking to step up to some larger sec. form's, 6" and larger.
 > >What is the best material ? My current forms are all 4.5" ABS sched. 40
 > >pipe in various length's, thank's Shane...      Arcin in Wisconsin....
 > >
 >
 >
 >
 >
 >
 >
 >