[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Need Volunteers to check Artwork - VTTC Staccato Controller



Original poster: "by way of Terry Fritz <teslalist-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>

Well, the design is about complete for the VTTC / SSTC Staccato Controller.

I've already done an initial check on the artwork and would like to
hopefully have some volunteers to cross-check this board artwork with
the current schematic to make sure there are no errors.  So any help is
greatly appreciated.

TOP LAYER
http://www.spacecatlighting-dot-com/datasheets/sc2026_toplayer.pdf

BOTTOM LAYER
http://www.spacecatlighting-dot-com/datasheets/sc2026_bottomlayer.pdf

SILKSCREEN LAYER
http://www.spacecatlighting-dot-com/datasheets/sc2026_silkscreen.pdf

SCHEMATIC SHEET 1
http://www.spacecatlighting-dot-com/datasheets/staccato_driver_sheet01.pdf

SCHEMATIC SHEET 2
http://www.spacecatlighting-dot-com/datasheets/staccato_driver_sheet02.pdf

Thanks in advance!!!

The Captain


If you've never checked artwork before, you basically are going trace by
trace through the artwork and making sure it agrees with the schematic.