[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

VTTC Stacatto Driver PCB Boards - Please reply



Original poster: "by way of Terry Fritz <teslalist-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>

As before, I am going to have some PCB boards made up utilizing the Dave
Sharp / John Freau / Steve Ward  Staccato Driver for VTTC coils.
A lot of you have already responded, but I would like to request that you
re-respond to the following address if you are interested and answer the
following questions:

dhmccauley-at-spacecatlighting-dot-com

Question 1:  How many boards would you be interested in?
Question 2:  Would you be willing to spend an extra $10.00 per board to have
solder masks and silkscreens?  Currently the board will only be two layers.
dhmccauley-at-spacecatlighting-dot-com


My main goal is to create a detailed parts list for this item for which all
items can be ordered from www.digikey-dot-com.   This will allow one to easily
build up the
board without having to look all over creation for parts to populate the
board.

Estimated cost for boards so far will be $15-20 each.  The more people
interested in this design, the cheaper the boards will become.


I am also giving all individuals a chance to review the design and suggest
changes as necessary.

The Captain

dhmccauley-at-spacecatlighting-dot-com